Integrated Solid-phase Extraction Research Articles

3D printed microfluidic devices for integrated solid-phase extraction and microchip electrophoresis of preterm birth biomarkers

BackgroundPreterm birth (PTB) is a leading cause of neonatal mortality, such that the need for a rapid and accurate assessment for PTB risk is critical. Here, we developed a 3D printed microfluidic system that integrated solid-phase extraction (SPE) and microchip electrophoresis (μCE) of PTB biomarkers, enabling the combination of biomarker enrichment and labeling with μCE separation and fluorescence detection. ResultsReversed-phase SPE monoliths were photopolymerized in 3D printed devices. Microvalves in the device directed sample between the SPE monolith and the injection cross-channel in the serpentine μCE channel. Successful on-chip preconcentration, labeling and μCE separation of four PTB-related polypeptides were demonstrated in these integrated microfluidic devices. We further show the ability of these devices to handle complex sample matrices through the successful analysis of labeled PTB biomarkers spiked into maternal blood serum. The detection limit was 7 nM for the PTB biomarker, corticotropin releasing factor, in 3D printed SPE-μCE integrated devices. SignificanceThis work represents the first successful demonstration of integration of SPE and μCE separation of disease-linked biomarkers in 3D printed microfluidic devices. These studies open up promising possibilities for rapid bioanalysis of medically relevant analytes.

Integrated Solid-Phase Extraction, Ultra-High-Performance Liquid Chromatography-Quadrupole-Orbitrap High-Resolution Mass Spectrometry, and Multidimensional Data-Mining Techniques to Unravel the Metabolic Network of Dehydrocostus Lactone in Rats.

Dehydrocostus lactone (DL) is among the representative ingredients of traditional Chinese medicine (TCM), with excellent anticancer, antibacterial, and anti-inflammatory activities. In this study, an advanced strategy based on ultra-high-performance liquid chromatography-quadrupole-Orbitrap high-resolution mass spectrometry (UHPLC-Q-Orbitrap HRMS) was integrated to comprehensively explore the metabolic fate of DL in rats. First, prior to data collection, all biological samples (plasma, urine, and feces) were concentrated and purified using solid-phase extraction (SPE) pre-treatment technology. Then, during data collection, in the full-scan (FS) data-dependent acquisition mode, FS-ddMS2 was intelligently combined with FS-parent ion list (PIL)-dynamic exclusion (DE) means for targeted monitoring and deeper capture of more low-abundance ions of interest. After data acquisition, data-mining techniques such as high-resolution extracted ion chromatograms (HREICs), multiple mass defect filters (MMDFs), diagnostic product ions (DPIs), and neutral loss fragments (NLFs) were incorporated to extensively screen and profile all the metabolites in multiple dimensions. As a result, a total of 71 metabolites of DL (parent drug included) were positively or tentatively identified. The results suggested that DL in vivo mainly underwent hydration, hydroxylation, dihydrodiolation, sulfonation, methylation, dehydrogenation, dehydration, N-acetylcysteine conjugation, cysteine conjugation, glutathione conjugation, glycine conjugation, taurine conjugation, etc. With these inferences, we successfully mapped the "stepwise radiation" metabolic network of DL in rats, where several drug metabolism clusters (DMCs) were discovered. In conclusion, not only did we provide a refined strategy for inhibiting matrix effects and fully screening major-to-trace metabolites, but also give substantial data reference for mechanism investigation, in vivo distribution visualization, and safety evaluation of DL.

Fast and Sensitive Screening of Oxandrolone and Its Major Metabolite 17-Epi-Oxandrolone in Human Urine by UHPLC-MS/MS with On-Line SPE Sample Pretreatment.

Oxandrolone, a synthetic testosterone analog, is used for the treatment of several diseases associated with weight loss. Unfortunately, oxandrolone is abused by many athletes and bodybuilders due to its strong anabolic effect. We have developed and validated a highly sensitive and rapid on-line SPE-UHPLC-MS/MS method for the determination of oxandrolone and simultaneous identification of its major metabolite 17-epi-oxandrolone in urine matrices. Enrichment of the analytes via an integrated solid-phase extraction was achieved using an Acquity UPLC BEH C18 Column. Subsequently, the chromatographic separation of the on-line preconcentrated sample fraction was achieved using an Acquity HSS T3 C18 Column. For the structural identification of these analytes, a high-resolution mass spectrometer Synapt-G2Si coupled to the Acquity M-class nano-LC system with ionKey source was used. A highly sensitive determination of oxandrolone was achieved using a tandem quadrupole mass spectrometer XEVO TQD. The method was successfully validated in the linear range of oxandrolone from 81.63 pg·mL−1 (limit of quantification, LOQ) to 5000 pg·mL−1 in the human urine matrix. It was applied to the analysis of real urine samples obtained from a healthy volunteer after the oral administration of one dose (10 mg) of oxandrolone. Concentration vs. time dependence was tested in the time interval of 4 h–12 days (after oral administration) to demonstrate the ability of the method to detect the renal elimination of oxandrolone from the human body. Favorable performance parameters along with successful application indicate the usefulness of the proposed method for its routine use in antidoping control labs.

An integrated solid phase extraction with ionic liquid-thiol-graphene oxide as adsorbent for rapid isolation of fipronil residual in chicken eggs

A rapid and economic integrated solid-phase extraction (ISPE) method with ionic liquid-thiol-graphene oxide composite (IL-TGO) as a new adsorbent was established for the extraction of fipronil in chicken eggs. In this study, ISPE, a new form of solid-phase extraction, which combined the advantages of pipette-tip solid phase extraction (PT-SPE) and dispersive solid-phase extraction (DSPE), achieving rapid extraction of analyte with only a small amount of adsorbent. The three-dimensional porous IL-TGO was a new ideal adsorbent for fipronil due to the multiple adsorption interactions (π-π interaction, hydrophobic interaction and hydrogen bond), large adsorption capacity and fast adsorption rate. For this ISPE procedure, the analyte was adsorbed by IL-TGO through the pipette tip mode and then eluted through dispersive mode. Under the optimized condition, the proposed method performed following merits: good linearity (r = 0.9999), precision (RSD ≤ 6.3%), high recoveries (83.7% to 97.7%), rapid extraction (16 min), low consumption of adsorbent (3.00 mg of IL-TGO). The excellent recyclability of the ISPE device and the reusability of IL-TGO were observed and high recovery of fipronil (> 90%) was obtained after fifteen cycles. This work might provide promising strategy for the sensitive extraction and analysis of trace levels of fipronil from egg products.

Integration of Solid-Phase Extraction and Reversed-Phase Chromatography in Single Protein-Coated Columns for Direct Injection of Bupivacaine in Human Serum.

A rapid, reliable and precise integrated solid-phase extraction (SPE) and reversed-phase liquid chromatography method was developed and validated to determine bupivacaine in human serum using single protein-coated analytical columns. The protein-coated columns were packed with four different sorbents: TSK-ODS, LiChrosorb RP-8, LiChrosorb RP-2 and μ-Bondapak CN-bonded silica. The method involved direct injection of serum sample onto the columns for trapping of the analyte, clean-up from weakly retained serum endogenous components, as well as the final separation. The protein-coated columns operated in two different chromatographic modes. Serum proteins were extracted and cleaned up by SPE, whereas the final separation of bupivacaine was based on reversed-phase chromatography. The protein-coated TSK-ODS column resulted in more accurate peak integration and more reproducible results. A linear relationship between the concentrations of drug and peak areas was confirmed in the range of 100-2000ng/mL. Detection and quantification limits were 24.85 and 85.36ng/mL, respectively. The average recovery for bupivacaine ranged from 96.48% to 98.81%. The present methodology was successfully applied, with a high degree of confidence, to analyze clinical samples obtained from patient receiving 0.5% bupivacaine therapy.

Detection of monohydroxylated polycyclic aromatic hydrocarbons in urine and particulate matter using LC separations coupled with integrated SPE and fluorescence detection or coupled with high-resolution time-of-flight mass spectrometry.

A high-performance liquid chromatographic (HPLC) method with integrated solid-phase extraction for the determination of 1-hydroxypyrene and 1-, 2-, 3-, 4- and 9-hydroxyphenanthrene in urine was developed and validated. After enzymatic treatment and centrifugation of 500 μL urine, 100 μL of the sample was directly injected into the HPLC system. Integrated solid-phase extraction was performed on a selective, copper phthalocyanine modified packing material. Subsequent chromatographic separation was achieved on a pentafluorophenyl core-shell column using a methanol gradient. For quantification, time-programmed fluorescence detection was used. Matrix-dependent recoveries were between 94.8 and 102.4%, repeatability and reproducibility ranged from 2.2 to 17.9% and detection limits lay between 2.6 and 13.6 ng/L urine. A set of 16 samples from normally exposed adults was analyzed using this HPLC-fluorescence detection method. Results were comparable with those reported in other studies. The chromatographic separation of the method was transferred to an ultra-high-performance liquid chromatography pentafluorophenyl core-shell column and coupled to a high-resolution time-of-flight mass spectrometer (HR-TOF-MS). The resulting method was used to demonstrate the applicability of LC-HR-TOF-MS for simultaneous target and suspect screening of monohydroxylated polycyclic aromatic hydrocarbons in extracts of urine and particulate matter.

Rapid analyses of proteomes and interactomes using an integrated solid-phase extraction-liquid chromatography-MS/MS system.

Here, we explore applications of a LC system using disposable solid-phase extraction (SPE) cartridges and very short LC-MS/MS gradients that allows for rapid analyses in less than 10 min analysis time. The setup consists of an autosampler harboring two sets of 96 STAGE tips that function as precolumns and a short RP analytical column running 6.5 min gradients. This system combines efficiently with several proteomics workflows such as offline prefractionation methods, including 1D gel electrophoresis and strong-cation exchange chromatography. It also enables the analysis of interactomes obtained by affinity purification with an analysis time of approximately 1 h. In a typical shotgun proteomics experiment involving 36 SCX fractions of an AspN digested cell lysate, we detected over 3600 protein groups with an analysis time of less than 5.5 h. This innovative fast LC system reduces proteome analysis time while maintaining sufficient proteomic detail. This has particular relevance for the use of proteomics within a clinical environment, where large sample numbers and fast turnover times are essential.

Integrated solid-phase extraction-capillary liquid chromatography (speLC) interfaced to ESI-MS/MS for fast characterization and quantification of protein and proteomes.

The high peptide sequencing speed provided by modern hybrid tandem mass spectrometers enables the utilization of fast liquid chromatographic (LC) separation techniques. We present a robust solid-phase extraction/capillary LC system (speLC) for 5-10 min separation of semicomplex peptide mixtures prior to ESI-MS/MS for peptide sequencing. This speLC-MS/MS system eliminates sample-to-sample carry-over by using disposable micropipette solid-phase extraction tips (StageTips) for peptide sample loading, concentration, and desalting. Automated analysis of 192 replicates of E. coli peptide mixtures in 30 h demonstrated the throughput, stability, and reproducibility of the system. The speLC-MS/MS system detected low-femtomole amounts of peptides and allowed sequencing of 1 μg of HeLa cells protein extracts at a rate of ∼ 90 peptides/min, identifying more than 1500 peptides (>500 proteins) in a 10 min speLC-MS/MS experiment. Analysis by selected reaction monitoring by speLC-SRM-MS/MS of distinct peptides derived from the blood proteins IGF1, IGF2, IBP2, and IBP3 demonstrated protein quantification with CV values below 10% across 96 replicates. The speLC-MS/MS system is ideally suited for fast screening and characterization of large numbers of peptide-containing samples in biological, biomedical, and clinical laboratories.

An automatic versatile system integrating solid-phase extraction with ultra-high performance liquid chromatography–tandem mass spectrometry using a dual-dilution strategy for direct analysis of auxins in plant extracts

An automatic versatile system which integrated solid phase extraction (SPE) with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) was developed. Diverse commercial SPE columns can be used under an ambient pressure in this online system realized by a dual-dilution strategy. The first dilution enabled the direct injection of complex samples with minimal pretreatment, and the second dilution realized direct introduction of large volume of strong eluent into the UHPLC column without causing peak broadening or distortion. In addition, a post-column compensation mode was also designed for the matrix-effects evaluation. The features of the online system were systematically investigated, including the dilution effect, the capture of desorption solution, the column-head stacking effect and the system recovery. Compared with the offline UHPLC system, this online system showed significant advantages such as larger injection volume, higher sensitivity, shorter analysis time and better repeatability. The feasibility of the system was demonstrated by the direct analysis of three auxins from different plant tissues, including leaves of Dracaena sanderiana, buds and petals of Bauhinia. Under the optimized conditions, the whole analysis procedure took only 7min. All the correlation coefficients were greater than 0.9987, the limits of detection and the limits of quantitation were in the range of 0.560–0.800ng/g and 1.80–2.60ng/g, respectively. The recoveries of the real samples ranged from 61.0 to 117%. Finally, the post-column compensation mode was applied and no matrix-effects were observed under the analysis conditions. The automatic versatile system was rapid, sensitive and reliable. We expect this system could be extended to other target analytes in complex samples utilizing diverse SPE columns.

Characterization of an Attenuated Total Reflection-Based Sensor for Integrated Solid-Phase Extraction and Infrared Detection

A novel attenuated total reflection (ATR) sensor, which integrates solid-phase extraction (SPE) and infrared detection, is presented. The flow cell, which enables the on-line coupling with a sequential injection system, is the core of the proposed sensor since it allows the continuous delivery of different solutions through the ATR and also the continuous spectrum acquisition. A SPE sorbent material (LiChrolut EN) was located in the sensitive element of the ATR without using any external coating substance, increasing the versatility of the system. A marked sensitivity enhancement was obtained as the analyte was concentrated before detection. The new sensor was qualitatively and quantitatively validated using the determination of caffeine in soft drinks as the model analytical problem. Linearity, precision (RSD = 4%), and sensitivity (LOD = 7 microg/mL) levels have been established. Finally, the main advantages and limitations of the new proposal are presented and compared with existing alternatives.

Identification of isomeric tropane alkaloids fromSchizanthus grahamii by HPLC-NMR with loop storage and HPLC-UV-MS/SPE-NMR using a cryogenic flow probe

Two fully automated HPLC-NMR methods are reported and compared for the structure elucidation of four isomeric tropane alkaloids from the stem-bark of an endemic Chilean plant, Schizanthus grahamii Gill. (Solanaceae). The first approach interfaced a conventional HPLC column to NMR by means of a loop storage unit. After elution with a mobile phase consisting of deuterated water and standard protonated organic solvents, the separated analytes were momentarily stored in a loop cassette and then transferred one-at-a-time to the NMR flow probe for measurements. The second strategy combined HPLC with parallel ion-trap MS detection and NMR spectroscopy using an integrated solid-phase extraction (SPE) unit for post-column analyte trapping. The SPE cartridges were dried under a gentle stream of nitrogen and analytes were sequentially eluted and directed to a cryogenically cooled flow-probe with an NMR-friendly solvent. The structures of the four isomeric alkaloids, 3alpha-senecioyloxy-7beta-hydroxytropane, 3alpha-hydroxy-7beta-angeloyloxytropane, 3alpha-hydroxy-7beta-tigloyloxytropane and 3alpha-hydroxy-7beta-senecioyloxytropane, were unambiguously determined by combining NMR assignments with MS data.

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate- co-ethylene dimethacrylate or 3-sulfopropyl methacrylate- co-butyl methacrylate- co-ethylene dimethacrylate. Using a 1 cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50 mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.

An integrated solid-phase extraction system for sub-picomolar detection.

A microchip structure etched on a glass substrate for packed column solid-phase extraction (SPE) and capillary electrochromatography (CEC) is described. A 200 microm long, octadecylsilane (ODS) packed column was secured using two different approaches: solvent lock or polymer entrapment. The former method was utilized for SPE while the latter approach was applied for CEC. In SPE, the ODS packed chamber gave a detection limit of 70 fM for a nonpolar BODIPY (493/503) dye when concentrated for 3 min at an electroosmotic flow rate of 4.14 nL/min, compared to 30 pM for this detector without the SPE step. SPE beds showed reproducible, linear calibration curves (R(2) = 0.9989) between 1 and 100 pM BODIPY at fixed preconcentration times. Breakthrough curves for the 330 pL (ODS-packed) bed indicated a capacity for BODIPY dye of 8.1 x 10(-14) mmol, or 0.25 mmol dye per liter of bed. The ODS-chamber could also be used to analyze dilute amino acid and peptide solutions. In the CEC format, two neutral dyes (BODIPY and acridine orange) were baseline-separated in an isocratic run with a theoretical plate count of 84 (420 000 plates/m) and a reduced plate height of about 1. A labeled peptide was also analyzed by CEC, using the acidic eluent (84% acetonitrile, and 26% aqueous trifluoroacetic acid (0.05%)) preferred for peptide separations on ODS-coated silica particles.

High-performance liquid chromatography integrated solid-phase extraction in bioanalysis using restricted access precolumn packings

Tailor-made precolumn packings for HPLC integrated extractive clean-up of (bio)fluids are characterized by possessing a defined diffusion barrier and a biocompatible outer particle surface (restricted access materials, RAM). Only analytes of low molecular mass have free access to the binding centers at the inner pore surface, and thus can be retained and extracted selectively. These adsorbents allow the easy, inexpensive installation and economic operation of fully automated coupled-column systems for repetitive on-line solid-phase extraction (SPE), and the subsequent analytical separation of untreated (bio)fluids.